Automotive Professionals Pty Ltd

Automotive Professionals Pty Ltd

3/10 Hudson Ave Castle Hill NSW

02 9680 2244

Brake Fitting and Repairs

Brake Components Servicing and Repairs

Brake Repairs all make and models

Automotive Professionals at Castle Hill is a full-service automotive repair and preventive maintenance centre for all types of vehicles including four wheel drive and SUV's.

Performing our high quality and guaranteed automotive brake repairs and servicing we also upgrade brakes to a higher standard increasing braking and vehicle performance suspensions and supply 4wd accessories.

Safety

The assurance of knowing your vehicles brakes is priceless!

The safest way to be on the Australian roads is to have high performance brakes and rotors. Today good brakes are so important with more and more cars on the roads and the constant changing road conditions. Every driver needs have complete peace of mind in knowing that they are able to STOP with ease and precision on the roads.

Servicing

The Automotive Professionals at Castle Hill service all makes and models of vehicles, including work utes - SUV's – Four Wheel drives (4 x4) van, mini buses, small trucks, box or car trailers. Our team specialise in repairing or replacing standard brakes and we are able to install all types of high performance brakes. The Automotive Professionals only use the highest quality brake parts and all our work is fully guaranteed.

Front and Rear Reline

All worn brake components are replaced with parts matching the original Manufactures specifications.

Disc Drum Machining or Disc Grinding

Rotors and Drums are first measured and if required are replaced or tuned to match Original. Disc Rotors – Rotors are the major stopping component of the modern cars braking system. Rotors naturally wear with the constant stopping and it is most important that they remain within Manufactures thickness tolerances for safe and efficient performance and or smooth operation, optimum life and better performance. All worn brake components are replaced with parts matching the original Manufactures specifications.

Disc Drum Machining or Disc Grinding

Rotors and Drums are first measured and if required are replaced or tuned to match Original. Disc Rotors - Rotors are the major stopping component of the modern cars braking system. Rotors naturally wear with the constant stopping and it is most important that they remain within Manufactures thickness tolerances for safe and efficient performance and or smooth operation, optimum life and better performance.

Calliper servicing and overhaul

The Calliper is an intricate part of the braking system and like any moving part Callipers need attention and service. A full calliper service is completed on every brake service.

Wheel cylinder replacement - Hydraulic Service

Like the Callipers, wheel cylinders and the Hydraulic are also an intricate part of the braking system, your brake systems relies on effective Hydraulic parts and brake fluid to make a car stop correctly. From the booster to the pedal ABS can ensure all components run smoothly and safely

Our brakes are able to tell you when there is an issue!

The best way to insure your brakes are in good working order is to have them looked at every service.

Sticking Brake Pedal

When the brake pedal is pressed and fails to release right away this could be telling you that your car has a hydraulic faulty or master cylinder issue. This is a problem that needs to be sorted before the condition causes serious damage and requiring expensive repairs.

Brake Noise or squealing

Noisy brakes can indicate that pads are worn and are in need of replacement or dust has accumulated around the disc or drums and requires service. Noisy, rattling brakes indicate that something could be loose and possibility worn past the time to repair. If your vehicle is displaying this warning sign, don’t wait check it immediately.

Vehicle pulling to one side - Brakes Veering

If your vehicle is pulling to one side when you apply the brakes get them checked right away, it could be as simple as low tyre pressure or the problem could be larger it is not worth your life or someone else’s have the brakes checked.

Locking Brakes

If you brakes grab or even lock when applied even with light pressure, the probable cause could be oil or grease or on your brake linings or the worst case scenario could be a loose or broken components that could cause your brakes to fail.

Vibration in the steering wheel or vehicle

Should you develop a vibration in the brake pedal or you feel a vibration in the steering when the brakes are applied or in some cases the entire vehicle vibrates when you apply the brakes. This is usually a rotor or brake drum issue, either could be out of shape due to a change in the weather, driving through water with hot brakes, the instant cooling can cause rotor to change in shape and then they could require grinding or replacement you could have also developed problems with the steering mechanism, or other components could have vibrated loose.

• PHONE 02 9680 2244  • OR MAKE A BOOKING TODAY •

Contact Us by e-Mail at autoprof@hotkey.net.au

Where to find us:- 3/10 Hudson Avenue Castle Hill

Contact Us by e-Mail at autoprof@hotkey.net.au

 

Automotive Professionals Pty Ltd

3/10 Hudson Ave Castle Hill NSW

• PHONE 02 9680 2244 •

• e-Mail us to autoprof@hotkey.net.au

Over 30 years of Motor Mechanical Repairs and Servicing

Motor Vehicle Mechanical Service and Repair Specialists